国产又猛又黄又爽,少妇高潮毛片色欲ava片,欧美亚洲色帝国,欧洲吸奶大片在线看,4hu四虎永久在线观看,亚洲精品自产拍在线观看,日本亚洲欧美在线观看,久久久久久亚洲AV成人无码国产
Your Current Position:  Common problem
  • Adhesion

    Adhesion is the interaction that develops between two dissimilar bodies when they are in contact. At the molecular level, adhesion is based on physical and in some cases chemical bonding. The strength of adhesion depends on the type of adhesive.


    Pressure sensitive adhesives build up adhesion under light pressure. The ultimate bonding strength is reached after 24 ~ 72 hours.

     

    1.jpg


    Test method: “peel adhesion test” and "initial tack - rolling ball" . For specific data, please refer to TDS.


    Adhesive failure describes the separation of adhesive either from backing or from the substrate. The other basic failure mechanism of an adhesive bond is “cohesive failure” which refers to a fracture in the middle of the bulk adhesive.

     


  • Adhesive

    Adhesives are polymer materials that are used to join dissimilar materials. Adhesives may be classified in many ways, e.g. by mode of application and setting, chemical composition, cost, and suitability for various adherents and end products.


    The term "pressure sensitive adhesive" (PSA) is used to describe adhesives that are permanently tacky in dry form at room temperature. The most common pressure sensitive adhesives are acrylics, natural rubber/resin, and synthetic rubber/thermoplastic rubber. For comparison of basic properties, please refer to the following table:

    1.jpg


  • Ageing resistance

    1.jpg

    Degree of reliable performance of the tape over time, under certain conditions. Depending on the adhesive system being used, PSA tapes are often usable for permanent applications. This permanence is reflected by the resistance of the adhesive against:

    - Ozone (O3), Oxygen (O2)

    - UV light: relevant for transparent substrates such as glass or PC; under direct exposure, yellowing or discoloration of the adhesive or backing (e.g. window bars).

    - Temperature - Humidity, water

    - Different kinds of chemicals …


    Generally acrylic adhesives are much better suited to withstand these environmental influences than rubber adhesives and can maintain their permanent, reliable functionality over many years.


  • Backing

    Materials which “carry” the adhesive. The backing also reinforces the PSA tape and improves handling and processing properties. Most commonly used backing types are: 

    1. Film backings (e.g. PET, PP, PVC, PE)

    2. Paper based backings (e.g. non-woven, tissue)

    3. Foam backings (e.g. PU-, PE-, PVC-foams)

    4. Woven cloth (e.g.rayon, cotton, PA, PET) A specialty PSA tape type is a transfer PSA tape which has no backing. The adhesive is directly coated on the liner.

    5. Other less typical backing materials are cloth, fabrics, metals etc. Overview of backing material characteristics:

    1.jpg


  • Cohesion

    Cohesion describes the inner strength of the adhesive. It mainly determines the holding power (shear resistance of the tape. Test method: “shear resistance test”.

    1.jpg

    Cohesive failure leaves adhesive residue on both the PSA tape backing and the laminated surface, showing that the adhesive broke internally. Easy check with the finger: it sticks on both the substrate and the tape.

    Basically: high cohesion = higher temperature resistance = lower tack = high holding power

    2.jpg


  • Conformability

    The backing of a PSA tape influences its ability to adhere to curved, rough or irregular surfaces. Conformable backings increase the contact area of adhesive and substrate. Foam backings are inherently conformable and can therefore compensate for surface irregularities between the two bonding substrates.

  • Dimensional stability

    Correlates with humidity of liners. Dimensional stability prevents the liner from showing an irregular surface or dimensional change due to absorption of moisture.

    Dimensionally stable liners are mainly PE coated paper liners and Film liners.


  • Double-sided tape

    Comprised of a backing material coated with adhesive on both sides. Usually one adhesive layer is covered with a release liner (closed side) in order to wind the PSA tape in roll form. In d/s tape production the backing is often pre-treated with a primer to enable a maximum anchorage between backing and adhesive. Transfer tape.

    1.jpg

  • Fish eyes

    Optical effect caused by entrapment air between different tape layers on a roll.


  • Foam

    Material containing small holes (cells) distributed throughout the entire body. Most common foams are:

    -AC-foam Ethylene

    -vinylacetate

    -foam (EVA) Polyurethane

    -foam (PU) Polyethylene-foam (PE)


主站蜘蛛池模板: 久久本道综合久久伊人| 亚洲国产成人久久综合区| 人妻精品久久无码专区精东影业| 人妻丰满av无码中文字幕| 国产精品玩偶在线观看| 精品免费看国产一区二区| 国产成人a视频高清在线观看 | 亚洲成av人在线观看网站| 嫩草国产露脸精品国产软件| 日韩乱码人妻无码中文字幕视频| 国产传媒麻豆剧精品av| 亚洲国产成人久久综合电影| 天天做天天爱夜夜夜爽毛片| 伊人久久大香线蕉影院| 亚洲欧美日韩成人综合网| 无码专区—va亚洲v专区| 亚洲成a人片在线观看无码专区| 无码中出人妻中文字幕av| 国产精品爆乳奶水无码视频免费 | 亚拍精品一区二区三区探花| 99爱国产精品免费高清在线| 国产亚洲精品久久久久久国| 国产av无码专区影视| 婷婷开心色四房播播| 亚洲色欲色欲天天天www| 中文在线а√在线天堂中文| 97se亚洲国产综合自在线不卡| 国产成人精品无码专区| 亚洲综合区图片小说区| 亚洲第一页综合图片自拍| 国产精品www夜色视频| 亚洲国产桃花岛一区二区 | 丰满少妇被粗大猛烈进人高清| 国产精品成人久久小草| 在线无码免费网站永久| 国产麻豆精品传媒av国产婷婷| 性男女做视频观看网站| 成人性无码专区免费视频| 女人被爽到高潮视频免费| 国产日产高清欧美一区| 一区二区不卡av免费观看|